Showing posts with label common substrate. Show all posts
Showing posts with label common substrate. Show all posts

Why is body connected to ground for all nmos and not to VDD

To prevent latch-up in CMOS, the body-source and body-drain diodes should not be forward biased; i.e, body terminal should be at same or lesser voltage than source terminal (for an NMOS; for a PMOS, it should be at higher voltage than source). This condition will be satisfied if we connect all the nmos bodies to their respective sources. But we see that all the body terminals are connected to a common ground.

This is due to the reason that all the nmos transistors share a common substrate, and a substrate can only be biased to one voltage. Although it introduces body effect and makes transistors slower and deviate from ideal mos current equation, there is no other way.

One could achieve different body voltage for all nmos transistors by putting all transistors in different wells, but that would mean a tremendous penalty in terms of area as there needs to be minimum size and separation that needs to be maintained which is huge in comparison to transistor sizes. This is the reason why body is connected to ground for all NMOS.

Similarly, body of all PMOS transitors is connected to a common terminal VDD.